Name: H&B Thermal 2-Seal Tie - Box of 125
SKU: H&B Thermal 2-Seal Tie
Price: 143.75 USD
Availability: InStock

Details

H&B Thermal 2-Seal Tie - Box of 125 Features

Material and Coating: Stainless steel construction with a proprietary coating for reduced thermal transfer.
Compliance: Meets UL94 standard for flammability of plastic materials.
Dual-Diameter Barrel: Features factory-installed stainless steel bonded EPDM washers for effective sealing.
Large Washer Design: A 1-1/2” diameter washer seals insulation and secures it to the backup.
Improved Seal: Offers superior sealing compared to anchors that only seal at the insulation level.
Integrated #12 Screw: Simplifies installation with an integrated screw in the dual-diameter barrel.
Versatile Length Options: Available in lengths ranging from 5/8" to 6-1/2" to suit various insulation and wallboard thicknesses.
Air and Moisture Infiltration Prevention: Ensures a secure seal against air and moisture, enhancing building envelope performance.

Specifications

Vertical Adjustability	Sizes	Backup Type	Finishes/Materials	Minimum Air Space Requirement
1 1/4"	5/8"	Metal Stud	Type 304 - Stainless Steel	7/8"
	1"
	1 1/2"
	2"
	2 1/2"
	3"
	3 1/2"
	4"
	4 1/2"
	5"
	5 1/2"
	6"
	6 1/2"

NOTE: If you don't see a size or style that you are looking for please contact our customer service dept (CustomerService@CMUSupply.com) for price, availability and lead times.

IMPORTANT: Since each construction project is unique, the appropriate selection and use of any product contained herein must be determined by competent architects, engineers and other appropriate professionals who are familiar with the specific requirements of the project in question. This drawing and/or data sheet is the confidential and proprietary information of Hohmann & Barnard, Inc. and is not to be reproduced, copied or disclosed, in whole or in part, without the prior written consent of CMU Supply.

Compare

Hohmann & Barnard Veneer Anchor Comparison Chart

Feature	H&B 2-Seal Anchor Tie	H&B Concrete Seal Tie	H&B 2-Seal Thermal Wing Nut Anchor	H&B Thermal 2-Seal Tie	H&B Thermal Concrete 2-Seal Tie	H&B Thermal Concrete Wing Nut Anchor
Designed For	Metal stud backup	Concrete, CMU, wood, or brick backup	Metal stud backup	Metal stud backup	Concrete, CMU, wood, or brick backup	Concrete, CMU, wood, or brick backup
Material	Carbon steel with polymer coating	Polymer-coated zinc alloy	Stainless steel with thermal wing	Stainless steel with UL94 coating	Stainless steel with UL94 coating	Stainless steel with UL94 coating
Thermal Break Design	No	No	Yes – thermal wing with flame-resistant coating	Yes	Yes	Yes – thermal wing with flame-resistant coating
Sealing Mechanism	Dual EPDM washers	Dual EPDM washers	Dual EPDM washers + thermal wings	Dual EPDM washers	Dual EPDM washers	Dual EPDM washers + thermal wings
Washer Size	1-1/2 in.	1-1/2 in.	1-1/2 in.	1-1/2 in.	1-1/2 in.	1-1/2 in.
Screw/Anchor Type	#12 integrated screw	Special alternating thread screw	Wing nut anchor	#12 integrated screw	Special alternating thread screw	Wing nut anchor
Installation Notes	Requires 2-Seal Chuck Adapter	Pre-drilled 7/32 in. hole required	5/16 in. hex head, pre-drilled 5/32 in. hole	Standard installation	Pre-drilled 5/32 in. hole required	5/16 in. hex head, pre-drilled 5/32 in. hole
Insulation Thickness Range	5/8 in. to 6-1/2 in.	5/8 in. to 5 in.	5/8 in. to 6-1/2 in.	5/8 in. to 6-1/2 in.	5/8 in. to 5 in.	5/8 in. to 6 in.
Seismic Compatibility	With 2-Seal Byna-Lok Wire Tie	With 9 ga or 3/16 in. continuous wire	With Seismic 2X-HOOK Pintle	No specific mention	No specific mention	With Seismic 2X-HOOK Pintle
Finish Options	Polymer-coated carbon steel, stainless available	Galvanized, Type 304, Type 316 stainless	Stainless steel	Stainless steel	Type 304 stainless barrel with polymer-coated screw	Stainless steel
Adjustability	No	No	Yes – up to 1/2 in.	No	No	Yes – up to 1/2 in.