MAX RB613T Battery Rebar Tying Tool

MAX RB613T Battery-Powered Rebar Tying Tool

The RB613T is a battery-powered rebar tying tool that ties rebar from #5x#5 through #9x#10 (varies by rebar manufacturer), using 19ga MAX TWINTIER wire. It is suited to precast plants, road and bridge construction, tilt-up, foundations, retaining walls, electrical conduit, and swimming pools.

Jaw capacity extends past most battery-powered rebar tiers, covering light reinforcement through #9x#10 bar with a single tool. Rated at approximately 5,000 ties per charge with a tie speed of about 1/2 second, roughly 15% faster than the RB611T. Use with TW1061T, TW1061T-PC, TW1061T-EG, or TW1061T-S wire, 19ga, loaded in coils of 115 to 205 ties each.

Features

• Jaw capacity reaches #9x#10 rebar, extending past most battery-powered tiers and covering a wider bar range with one tool.
• Tying speed of approximately 1/2 second per tie, about 15% faster than the RB611T.
• Wire loading assist mechanism simplifies loading dual wire coils.
• Reduced trigger effort lowers operator fatigue over repeated ties.
• Wire Bending Mechanism produces a shorter tie height, requiring less concrete to cover each wire tie.
• Wire Pull Back Mechanism dispenses the precise wire length needed per tie, reducing wire usage.
• Battery delivers up to 5,000 ties per charge; full charge in approximately 80 minutes, or about 60 minutes for an 80% charge.
• Black or poly-coated tie wire for MAX TWINTIERs is manufactured to meet BABA requirements.