Multiquip QP15HP 1.5" High Pressure Pump with Honda Engine

SKU: 210468

| MPN: QP15HP

IN STOCK (1)

Brand

Multiquip QP15HP 1.5" High Pressure Pump with Honda Engine

The Multiquip QP15HP 1.5" High Pressure Pump is a highly efficient, portable pump designed for demanding applications that require high pressure and fast water transfer. Powered by a reliable 49.4cc Honda OHV GXH50 engine, this pump is perfect for various tasks such as equipment wash-down, emergency fire-fighting, irrigation, water jetting, and dust control. With a fast priming time, durable die-cast aluminum body, and the ability to reach up to 86 PSI, it delivers both power and convenience. The pump is lightweight, weighing only 22 lbs, making it easy to transport across job sites. The self-priming design requires initial priming and is fitted with a silicon/carbon mechanical seal to ensure long-lasting use and resistance to abrasion. With a maximum head of 197 feet and flow rates of up to 56 gallons per minute, the Multiquip QP15HP pump is the go-to choice for contractors and emergency services that require high-pressure water applications.

Features

  • 49.4cc Honda OHV GXH50 engine for reliable, powerful performance in high-pressure applications.
  • Weighs only 22 lbs, making it lightweight and easy to transport for on-site operations.
  • Die-cast aluminum pump casing ensures durability while keeping the pump lightweight.
  • Fast priming time for immediate response during urgent tasks like emergency fire-fighting.
  • Delivers up to 86 PSI for high-pressure water transfer in applications like water jetting and equipment wash-down.
  • Self-priming design with silicon/carbon mechanical seal for long-lasting use and abrasion resistance.
  • 1.5" NPT suction and discharge ports for easy hose connections, replaceable if threads are damaged.
  • Anti-vibration absorbers to prevent movement or "walking" of the pump during operation.
  • Handles a flow rate of up to 56 gallons per minute, making it suitable for various high-pressure applications.
  • Maximum head of 197 feet ensures efficient water delivery over long distances.
  • Convenient built-in transport handle for easy portability on job sites or emergency scenarios.
  • EPA/CARB Certified 2.1HP Honda engine for safe, environmentally friendly operation.
  • Shock-mounted pump design minimizes operating harmonics and ensures smooth performance.

Multiquip QP15HP 1.5" High Pressure Pump with Honda Engine Specifications

Specification Details
Suction x Discharge 1.5" x 1.5" / 51 suc. x 38x25x25 dis. mm
Self Priming Yes
Max. Water Capacity 56 gpm (450 lpm)
Max. Lift 25 ft (7.6 m)
Max. Head 197 ft (60 m)
Max. Pressure 86 psi (587 kPA)
Max. Solid Intake 0.18 in (6 mm)
Fuel Tank Capacity 0.8 qt (3.6 L)
Pump Head Material Aluminum
Pump Housing Drain Yes
Quick Clean Out No
Mechanical Seal Material Silicon Carbide
Impeller Material Cast Iron
Handles Solids Yes
Submersible No
Inlet Diameter 1-1/2 in
Outlet Diameter 1-1/2 in
Overall Length 16" (406 mm)
Overall Width 11" (279 mm)
Overall Height 15" (381 mm)
Operating Weight 22 lbs. (10 kg)
Solids Handling Size 0.18 in
Suction Head 25 ft
Total Head Lift 197 ft
Engine Brand Honda GX
Starting System Recoil Start
Engine Cycles 4-Cycle
Low Oil Shutdown Yes
CC 49.4 cc
Fuel Tank Size 0.2 Gallons
Run Time 1 Hour
Tool Kit No
Strainer No
Float Switch No
Hose Couplings Yes
Hose Sold Separately
Hose Bands No
Transport Handle Yes
Wheel Kit No
Write Your Own Review
You're reviewing:Multiquip QP15HP 1.5" High Pressure Pump with Honda Engine
Your Rating
Customer Questions
How long does it take to prime the Multiquip QP15HP before it can begin pumping effectively?
The priming time for the Multiquip QP15HP is typically quick, ranging from a few seconds to a couple of minutes, depending on the conditions such as the length of the suction hose and the height of the water source relative to the pump.
Did you find what you were looking for?
We found other products you might like!