BN Products Cutter/Bender #5 (16mm)

SKU: 226457

| MPN: DBC-16H

Brand

Features

  • Portable combination tool for cutting and bending rebar.
  • Unique design allows for in-place or stationary fabrication applications.
  • Powerful electric/hydraulic tool for up to #5 (16 mm) grade 60 rebar.
  • Bends rebar up to 180 degrees without changing attachments.
  • Fast cut speed of 3 seconds and bending roller diameter of 2.42" (62 mm).
  • Clearance of 1-3/4" (44.5 mm) for in-place cutting and 4.5" (115 mm) for in-place bending.
  • Comes with a plastic carrying case, tool kit, hydraulic oil, and operations manual.
  • Named one of the Most Innovative Products at the World of Concrete Exposition.
  • Power supply: Electric motor 115v, 50/60 Hz - 10 amps.
  • Total weight: 40 lbs. (18.2 kg).
  • Tool dimensions: 25-1/8" L x 6-3/8" W x 8-5/8" H (including lifting handles with cutter up).

Specifications

Cut / Bend Speed 3 seconds / 180 degree bend in 7 seconds
Bending Roller Diameter 2.42" (62 mm) (R 31)
Clearance (In-place) Cutting 1-3/4" (44.5 mm) from Surface
Clearance (In-place) Bending 4.5" (115 mm) from Surface
Rebar Capacity Up to #5 (16mm) Grade 60
Power Supply Electric motor 115v, 50/60 Hz - 10 amps
Tool Weight 40 lbs. (18.2 kg)
Tool Dimensions (L x W x H) 25-1/8" x 6-3/8" x 8-5/8" (including lifting handles with cutter up)
Contents Plastic carrying case, tool kit, hydraulic oil, operations manual

 

Write Your Own Review
You're reviewing:BN Products Cutter/Bender #5 (16mm)
Your Rating
Customer Questions
How does the BN Products DBC-16H handle simultaneous cutting and bending operations?
The DBC-16H is designed to perform cutting and bending operations independently but can handle both tasks on the same piece of rebar without needing to change attachments. This capability saves time and increases efficiency on the job site by reducing...
How does the DBC-16H ensure precision in bending rebar to specific angles?
The DBC-16H features a built-in angle selector that allows operators to set precise bending angles up to 180 degrees.
Can the DBC-16H be used in both in-place and stationary fabrication applications, and how does it perform in each setting?
Yes, the DBC-16H is versatile enough to be used for both in-place and stationary fabrication applications. Its compact design and clearance allow for easy in-place cutting and bending, while its powerful hydraulic system ensures efficient performance...
Did you find what you were looking for?